
Commercial fence installation in Shreveport demands speed, durability, and reliable installation that stands up to job site conditions and event timelines. Whether you're managing a construction site in downtown Shreveport, staging a temporary barrier in Bossier City, or securing a commercial lot in Greenwood, temporary fencing protects your perimeter, controls access, and meets local safety standards. We install and remove commercial and temporary fencing panels fast, from chain link barriers to silt fence for erosion control, with crews based right here in Caddo and Bossier parishes. Since 2015, we've handled job sites, special events, and seasonal security needs across Greater Shreveport. Our work is straightforward: solid installation, on-time removal, and honest guidance on what your site actually needs.
Why Temporary Fencing Matters for Shreveport Commercial Sites
Construction sites, event venues, and commercial properties need fencing that goes up quickly and comes down without damage to the underlying property. Temporary fencing serves multiple purposes: it controls pedestrian and vehicle access, contains materials and debris, meets OSHA and local code requirements, and protects neighboring properties. A well-installed temporary barrier also signals professionalism to clients, insurers, and local authorities.
- We install commercial chain link fence panels in modular sections for fast assembly and removal.
- We set up temporary construction fence systems that secure job sites without permanent footings.
- We install silt fence for stormwater and erosion control on graded or excavated lots.
- We provide construction site fencing that meets local building department and contractor insurance requirements.
- We remove all panels and hardware once your project closes, leaving the site clean.
Temporary fencing is not an afterthought, it is a required and measurable part of site management and liability control.
Key info: A typical construction site in Shreveport or Bossier City needs 200 to 400 linear feet of fencing. We quote panel count and installation labor separately, so you know exactly what the job costs before we start. Call (318) 666-4472 for a free site walk and estimate.
For more on how we approach security and access control, see our chain link fence installation page, which covers the same durable materials and installation methods we use for temporary barriers.
Learn more about local permitting and site requirements at the City of Shreveport Building Permits office, which oversees temporary fence installation on public or permitted commercial properties.
How We Install Commercial & Temporary Fencing in Shreveport
Our process is built for speed and compliance. We begin with a site walk to measure the perimeter, identify utilities, and confirm setbacks and gate locations. We then order or stage panels, install posts or ground anchors, and hang or slide panels into place. Once your project ends, we remove all hardware and panels and haul them away. The timeline depends on site size, terrain, and gate requirements, but most jobs are complete within one to three business days.
- We schedule a free site estimate and confirm your project timeline and access requirements.
- We call 811 for utility locates to avoid hitting buried lines when setting posts or anchors.
- We install posts in concrete or use ground anchors, depending on site conditions and whether the fence is permanent or removable.
- We hang galvanized or powder-coated chain link panels and secure them with tension bands and stretcher bars for anti-sag bracing.
- We install and test any gates, including self-closing and self-latching hardware for personnel or vehicle access.
- We inspect the completed fence for alignment, tension, and safety before we sign off.
- On project close, we remove all panels, posts, and hardware and haul away the material.
This structured approach ensures your site is secure from day one and restored cleanly when the job is done.
Local example: A residential demolition in Eastwood required 300 linear feet of 6-foot temporary fencing with a 10-foot driveway gate for equipment access. We installed the fence in one day, kept the gate keyed and self-closing, and removed everything within 24 hours of the final inspection. Total labor and materials cost $1,800.
For details on gate installation and self-closing hardware, see our gate installation and repair page.
Commercial Fencing Methods and Materials
| Approach | Description | Best for |
|---|---|---|
| Temporary chain link panels | Modular 6-foot galvanized or vinyl-coated panels with ground anchors or temporary posts. Set up in hours, removed without soil disturbance. | Construction sites, events, seasonal enclosures, rental agreements. |
| Silt fence | Lightweight fabric barrier on posts for stormwater and sediment control. Meets EPA and state erosion-control standards. | Graded lots, demolition sites, excavation areas, stormwater compliance. |
| Permanent posts with removable panels | Posts set in concrete, panels hung or slid into place. Panels can be removed and reinstalled or relocated as needed. | Long-term job sites, multi-phase projects, properties with seasonal security needs. |
| Commercial security fence | 6 or 7-foot galvanized chain link with anti-climb slats or fabric, reinforced gates, and access control hardware. | Equipment yards, material storage, high-security job sites, commercial compounds. |
Commercial & Temporary Fencing Cost in Shreveport: What to Expect
Temporary fencing costs depend on panel count, post type, site access, gate requirements, and removal timeline. A basic temporary chain link installation typically runs $4 to $8 per linear foot for materials and labor, depending on whether posts are temporary anchors or concrete-set. Silt fence for erosion control runs $2 to $4 per linear foot. A 300-foot temporary fence with one gate and concrete-set posts generally costs $1,200 to $2,400, plus removal fees of $200 to $500 if the fence is not salvaged or relocated. For a precise figure, we offer a free site quote that includes measurement, material options, and labor breakdown. Multiple estimates are always wise, as site conditions (soil, slope, utility conflicts, gate count) can shift the cost significantly.
See our full pricing overview for detailed rates on temporary fencing, removal, and gate installation.
What to Look for When Hiring a Commercial Fence Contractor Near Shreveport
Choosing the right contractor for temporary fencing is as important as the fence itself. You need someone who shows up on time, installs to code, carries insurance, and removes the fence cleanly. Look for a crew with experience on commercial sites, not just residential jobs. Ask for references from recent commercial or construction projects. Confirm that the contractor carries general liability and workers compensation insurance and can provide a certificate on request. Understand whether permits are required for your site, and whether the contractor will handle permit applications or documentation. Finally, get the estimate in writing with a clear removal date and final cost.
- Verify that the contractor is fully insured and can provide proof of coverage before work begins.
- Ask for at least two references from commercial or construction sites completed in the past 12 months.
- Confirm that the contractor will call 811 for utility locates and document the locate before any digging.
- Get a written estimate that includes panel count, post type, gate hardware, installation labor, and removal cost.
- Clarify whether permits are needed and who is responsible for filing and inspections.
- Ask about emergency removal and after-hours access if your project timeline changes.
A professional contractor will answer these questions directly and provide documentation without hesitation.
Ready to get started? Contact us for a free estimate, or call (318) 666-4472. We are available for same-day or next-day site walks and can often mobilize within 48 hours of approval.
Commercial & Temporary Fencing in Shreveport: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Temporary chain link fence (6 ft) | $4-$8 per linear foot | Materials and labor for modular panels, temporary ground anchors or posts, basic installation and removal included |
| Silt fence (erosion control) | $2-$4 per linear foot | Lightweight fabric barrier, posts, stakes, and installation for stormwater and sediment control on graded sites |
| Gate installation (personnel or vehicle) | Starting at $400 | Single 4-foot or 10-foot gate, hardware, self-closing mechanism, and hinges for temporary or permanent installation |
| Fence removal and hauling | $200-$500 | Complete removal of panels, posts, and hardware, site cleanup, and material disposal or salvage transport |
| Site estimate | Free | Measurement, material options, labor breakdown, and removal timeline quoted in writing within 24 hours |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (318) 666-4472.